|
Belt
Blinding Product
Matrix |
For removal of struvite in vertical supernate lines and on belt filter presses.
Directions for use on Belt Filter Presses:
- Follow all safety precautions on label.
- Rotate belt press with wash water off.
- Using power drum pump and hose and nozzle, continuously wet all deposits while press is rotating.
- Approximately ever 1/2 hour, cease chemical addition and rinse down (flush away) deposits with garden hose and nozzle assembly.
Directions for use on Verticle Supernate Lines:
- Follow all safety precautions on label.
- Cease supernating thru the line you desire to clean.
- Use a suitable chemical feed pump (consult Schaner's) and necessary length of flexible tubing to reach the top of the supernate line. In the end of the flexible line, rig a temporary bracket to position the flexible tubing in the center of the supernate line.
- Slip over the tube a short length (3-4 feet) of PVC. Thie will keep the tubing straight. On the end of the flexible line, add a spinning nozzle (available from Schaner's). Turn on the pump and every pulse of the pump will put out a fine rotary mist of WASH-UP which will be absorbed by the struvite. This will completely dissolve your deposits.
PASSES: